Eicon Networks C21 Guida di Installazione Scaricare il pdf (Pagina 72)

ECCARD: Starting the Eiconcards 72

The following table lists the different Eiconcard status values:

Examples

The following example illustrates how to use ECCARD STATUS.

ECCARD STATUS

Provides detailed information on all Eiconcards in the gateway PC.

Status Value Description

DETECTED

The Eiconcard I/O Port Address and Memory Segment has been properly

configured, but the Card Identification (type) or IRQ test has failed or has

not yet been performed.

DUMPING

The contents of the Eiconcard's memory is currently being dumped to

disk.

HALTED

All Eiconcard tests have been completed successfully, the hardware

settings are correct, and the size of the Eiconcard's memory has been

determined. The Eiconcard has now been stopped, and must be restarted

to be used.

IDLE

This Eiconcard has not been properly configured. Make sure you have

the correct I/O, IRQ, and Memory Segment values configured for this

Eiconcard.

LOADED

The Eiconcard has been started, is functioning, and can be used for

communication, assuming the Ports have been activated.

The necessary protocol executables are being started onto the Eiconcard.

TESTING

An Eiconcard test is now in progress, or is in an intermediate state of the

start process.

TESTED

The Eiconcard has tested successfully.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 214 215

Nessun commento

Eicon Networks C21 Guida di Installazione Pagina 72